Web conferencing uses a web page from your PC workstation to connect to the conference. From this interface, you can share your desktop or applications (such as a WORD or Excel document); request remote control of an end user's PC to assist with troubleshooting; annotate shared documents; record the audio portions of meetings; text message meeting participants; basically manage meeting content and participants (if you are the scheduler/manager you can mute participants etc.). Video uses either web cams, Video enabled IP phone models, or H.323/SIP based videoconferencing endpoints (like Polycom, Tandberg, Sony, Cisco's Telepresence systems etc.) to connect room sized equipment. MeetingPlace can schedule these endpoints as resources in a meeting.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...