Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VM ports donot automatically register with 2nd Unity server when 1st Unity is down

I have a new CUCM implemetation with HA, so we have a Publisher and Subscriber server for Call Manager, Unity service and Presence.

I am testing High Availabilty features on my platform, and all services run OK on Subscriber servers BUT mail services.

When we check it, although Subscrber Unity becomes "primary server", ALL voice mail ports are resgistered with Subscriber Call Manager but none of them are connected to Subscriber Unity server.

When we check "Telephony Integration" on Unity servers we see that all ports are configured to use ONLY Unity Publisher server.

But when we try to change this configuration of thsese ports, we ONLY have the option to select ONE of the servers (Publisher or Subscriber), never both.

My question is: how can we set up a group so these voice mail ports can be connected to Publisher OR Subscriber Unity server ???

Thanks in advanced


Enrique Villasana

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

VM ports donot automatically register with 2nd Unity server when

Hi Enrique,

I'll just add this reference to the great tips from my buddy Chris

here! (+5 C-Man )

It would seem that none of the ports were assigned to the Subscriber

when going through this section of the config;

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/integration/guide/cucm_sccp/cucintcucmskinny200.html#wp1073447

Cheers!

Rob

"A smile relieves a heart that grieves" 

- Stones

10 REPLIES
Hall of Fame Super Silver

VM ports donot automatically register with 2nd Unity server when

Is this Unity or Unity Connection and what version?

Chris

New Member

VM ports donot automatically register with 2nd Unity server when

Hi Chris,

Unity connection version, 9.1

Thanks for your help

Enrique

Hall of Fame Super Silver

VM ports donot automatically register with 2nd Unity server when

You should be able to add CUCM servers under the port group configuration in UCXN.

Chris

New Member

VM ports donot automatically register with 2nd Unity server when

Chris the CUCM switchover is working good!!!

When CUCM publisher goes down, all voice mail ports get registration to CUCM subscriber with no problem.

BUT When I tested High Availability, and UCxN Publisher server goes down, I can see voice mail  ports registered on CUCM (Subscriber or Publisher) , BUT  they are not connected to proper UCxN subscriber server !!, ,,,,,they keep connected to UCxN Publisher, so we don't have voice mail ports availables for voice mail services on UCxN subscriber server.

I hope this information can help

Enrique Villasana

Hall of Fame Super Silver

VM ports donot automatically register with 2nd Unity server when

So, appears you are using SCCP for the integration, are your line groups/hunt list and hunt pilot configured properly?

Are you saying that the VM ports associated with UCXN publisher never unregistered?

Chris

New Member

Re: VM ports donot automatically register with 2nd Unity server

you are using SCCP for the integration, are your line groups/hunt list and hunt pilot configured properly?

Yes, and I followed procedure of Cisco Manual for ver9, and we have tested voice mail services, The problem reported was detected when we tested High Availability.

Are you saying that the VM ports associated with UCXN publisher never unregistered?

Yes, let me show you the situation with an image (unity backup fail.png) taken  from :

UCxN Serviceability -->Tools -->Cluster Management

......during the UCxN publisher (OyBUnity01) fail, The UCxN Subscriber (OyBUnity02)  gets "Primary Server" Status, but it does not get availability of any of 24 voice mail ports, configured.

And the voice mail services are unavailable.

THANK you for your attention.

Enrique Villasana

Hall of Fame Super Red

VM ports donot automatically register with 2nd Unity server when

Hi Enrique,

I'll just add this reference to the great tips from my buddy Chris

here! (+5 C-Man )

It would seem that none of the ports were assigned to the Subscriber

when going through this section of the config;

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/integration/guide/cucm_sccp/cucintcucmskinny200.html#wp1073447

Cheers!

Rob

"A smile relieves a heart that grieves" 

- Stones

New Member

Re: VM ports donot automatically register with 2nd Unity server

Hi  Rob/Chris,

Again thank you guys for your useful support !!

As I read on:

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/integration/guide/cucm_sccp/cucintcucmskinny200.html#wp1073447

I only can associated a half of voice mail ports to UCxN Publisher and other half to UCxNSubscriber, so in case of an outage of any of these UCxN servers my system will count with a half of total configured voice mail ports????

Just to verify with you...

Thanks again

Enrique Villasana

Hall of Fame Super Silver

Re: VM ports donot automatically register with 2nd Unity server

Correct, if the server down there are no voicemail ports for that server, hence the reason for redundant VM servers.

Chris

Sent from Cisco Technical Support iPhone App

New Member

Re: VM ports donot automatically register with 2nd Unity server

Again thanks Chris !!!

710
Views
5
Helpful
10
Replies
CreatePlease to create content