I have a UM and we are using the VMO client on the PCs. We have it setup so that the playback and record settings are set to the IP phone on the persons desk and not the PC. I need to know what TCP ports are used when a person presses the play button in the VMO client. I do not need to know about the RTP ports. I have two different networks and the data routes one way and the voice traffic another. I need to put a policy route statement in so that when a pc tries to connect to the unity server on the voice network it will go over this the same link that the voice traffic uses and not the link the data traffic uses. I have already had to do this for the ccmuser web page so I know that is what needs to be done. Any help would be appreciated. Again it is the ports that the client uses to connect to the unity server using the VMO client.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.