Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VMWare Virtual Network configuration guidance needed - CCM 5.1 VWWare

I've loaded CCM 5.1 over VMware a while back and had this running but am now trying to bring up CCMadmin and have been unsuccessful.

The Virtual Networking parameters have been tried in every way I could possibly thing of and I am not able to get a default gateway via dhcp.

Please look at the attachment. It will show you every view of the configuration.

I can ping back and forth between the physical adapter but cannot bring up ccmadmin via http.

Please help if you can think of things for me to try.

Thanks,

Ray

3 REPLIES
Anonymous
N/A

Re: VMWare Virtual Network configuration guidance needed - CCM 5

I've tried to attach the 1.8MB file and it has failed twice now. Email me if you want to view the traces. Thanks

Anonymous
N/A

Re: VMWare Virtual Network configuration guidance needed - CCM 5

Silver

Re: VMWare Virtual Network configuration guidance needed - CCM 5

Hi Ray,

Can you SSH to it?

You can ping the vmware machine from your pc?

Are all the basics in place? Firewall software etc? Nothing is blocking HTTPS or VMware?

What is your current virtual network setup?

If you want other devices to access the VM you will need to use bridged. The VM should have an IP in the same range as your physical adapter.

If you just want to access from your PC, you can use host only.

Cheers,

Tim

120
Views
0
Helpful
3
Replies