we have created a hunt pilot number with two numbers of phones in the line group. We need to create a voice mail box for the hunt pilot. If the both phones are not attending the calls, it should reach the voice mail box in the given time .
With Call manager 6.0
Can anyone help me how to set the voice mail box for the hunt PILOT NUMBER.
You are most welcome! I see what your doubts are here. If the VM is left on the Hunt Pilot DN/Mailbox anyone with the PIN would be able to access it but how would anyone know when a message has been left?? There would be no Red MWI Lamp on any phone. What many people do is to do one of two things;
1. Make the Hunt Pilot DN an Alternate Extension on an existing Line Group Members mailbox so the Red MWI Lamp would be lit on their phone.
2. Add a second "shared" line to all Line Group members phones and then set the Hunt Pilot DN an Alternate Extension on this new line so the Red MWI Lamp would be lit on all member phones.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...