Hello, I have Cisco asa 5505, CUCM 7, h323 GW(connected to PSTN through FXO) and android phone with Csimple(third party sip client), connected to CUCM.
My android phone connected (with 3G link) to l2tp vpn(configured on asa) and registered on CUCM (with Csimple - it is third party sip client)
PSTN call: Csimple -> H323(PSTN) -> OK. I hear the voice on other end of handset.
I try to call to another Csimple client on another 3G android phone, that has the same connection and configuration. I this situation the call goes through, I pick up the phone and did not hear the voice on the other end of the phone.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...