Want forwarded calls from analog system to hear common message
We are slowly converting from analog system to VoIP. Under the conversion, VoIP phones have a different prefix, but keep the same last four digits.
Analog = 223-xxxx
VoIP = 446-xxxx
Converted users have forwarded their 223 numbers to the 446 prefixes. I now want to forward all 223 upgraded numbers to the same unity extension 446-1000 where they will receive a message that the prefix has changed from 223 to 446.
I have to keep a few 223 extensions forwarded to their 446 extensions where they can leave voicemail due to the 223 numbers being well known.
First we had a call handler to play the message and had it play for all forwarded 223 extensions using wild card for DID numbers.. That didn't let my few 223 exceptions leave voicemail at the 446 extension.
I then setup a voicemail with it's own number 446-1000. Removed the wilcard from the call handler and disabled the call handler. Now Direct calls to 486-1000 number will play the message, but forwarded numbers receive the generic operator message.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...