However, we are not really changing to a different DC or an Exchange, it will be the same one just renamed, but it appears to me that we have to consider it as all new. Is this correct? If so, are there any steps I'm missing? What do I have to do to subscriber properties, if anything? Do I need to decommission the server from the domain before removing? Is there any concern as to the order of operations? E.G. Do I need to decommission, kill subscriber properties, have them change the domain name, then rebuild and re-add?
Is there anyway to not have to go this route, say using DNS to translate the old domain? We'll be migrating to Connection in several months, so I'd like to avoid a rebuild now if possible, as both time and budget are short.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...