Unified Computing System Discussions

Hi all,I’m trying to grab the cache size off of 272 servers with UCS Powertool and not getting the cmd right. Can either of you help me. There is something I don’t know about where that information is stored in the object model of UCS to know what cm...

Good morning, all! We have two C210 M2 rack mount servers running VMware 5.5 U2.  They have the two Intel NICs on the motherboard and a 4-port Broadcom NetXtreme II 5709.  This morning one of the two servers had the VMware driver crash, disabling two...

Hi! I am having trouble to integrate the new C240 M4 server into UCSM.  It just will not be discovered by UCSM, or just stuck at 9% to 12 % in FSM.  I did all the re-set to factory default, power drain, but still have a hard time to let UCSM discover...

Hello, All   I created one POC with UCSD 5.3, esxi and vcenter version 6, when apply service request to deploy VM with CentOS, request status is failed. Any idea to solve this case? Policies -> Vistula/H. Policies -> network -> vmware network policyP...

Hello,   I got a Question what license is needed?  If we upgraded a UCSC-C240-M4S2 with a second processor and 64GB extra of RAM.   The actual license we got  is VMW-VS5-HYP-K9 "Cisco UC Virt. Hypervisor 5.x (2-socket)"   I got this message when we a...

Hi! Can anybody tell me what is the Avail Status in UCSM mean?  All servers are running without any error.  but the Avail status is unavailable.  What is that mean? Thanks!  

Hi All,Been getting tons of emails stating System Notification telemetry:full. Please let me know how we can fix this issue? Thank you!

I need some help to upgrade my current UCS firmware. Can anyone help me out to guide me the path to upgrade. Current Base : Cisco UCS 6120XP Bios : S5500.2.0.5a.0.021220131047 ( Running ) Adapter 1 : Cisco UCS M81KR  - 2.0(5c)  ( Running ) ( Adapter ...

Hi all, In a UCS, version 2.2(3a),  we configured a VLAN to run only on Fabric A. Now, we require to change the properties of this VLAN in order to configure it in both FI (Global mode). The problem is that we do not find where this property can be m...

i need to know that UCS 6200 Fabric interconnects supports the below or not :- 1) Reduced port-to-port latency of 2 microseconds. 2) support Layer 2 Load-sharing for the Servers to work in NIC teaming mode. 3)support The Switch should support VM swit...