Unified Computing System Discussions

We have configured statistics collection with a 15 minute collection interval.  The data is reaching the Oracle database we established for the data.  However, when I try to run the standard network reports "receive traffic" and "transmit traffic", I...

 A customer has the following  : 1 - UCS 51082- B200- M23- Will replace B200 m2 to B200 M3 Questions :1- Is it possible to replace the blade and  boot up with the same service profile ?2- If he is doing local boot , can we just swap the disk and boot...

I am trying to setup a UCSB to boot esxi off an iSCSI drive.  I have the iSCSI boot setup and it looks good, but when I boot ESXi, it does not show the iSCSI drive as available to install to.  Any ideas where I should be looking?Forgot to mention, it...

Motherboard replacement

Does separate IP needed for each CIMC of each blade on UCS 5108 ?

Hi Team,I don't think you can beat real-life experience so I thought I'd ask this team whether they had any recommendations. We need to add some SSDs into our UCS B230s - we have this part code:   UCS-SSD100GI1F105=but my team understand this goes EO...

 Hello, Im trying to add RapidSSL CA certifiacte into Cisco UCSM.Im getting  failed to verify certificate chain, error: Failed to split certificate chain Any idea ? Cheers

I am setting up a Cisco UCS C220 M3S, and we have configured the CIMC, and agreed to the CIMC, after several reboots of the system, the card CIMC has ceased to function does not have link and each time you connect the cable to the physical card, the ...

I have a blade chassis with 8 servers, and a pool of management addresses assigned to a service profile template.  All 8 servers are built from this template.  There are 8 addresses in the pool.I am finding that 4 servers in I have exhausted all 8 ad...