Unified Computing System Discussions

Hi,Some how i got the feeling that to an Appliance port only a iSCSI target can be connected. I may be wrong. If i am i want the experts to clarify. To me it appears that, UCS FI, can not work as FCF that Nexux 5000 is capable of. If it is not capabl...

How do you test the call home feature on Cisco Call home?Thx

Hi,If my UCS FI has no upstram SAN and no upstream LAN, how do i verify the name serve database? How do i verify if the server has logged into the fabric or local attached storage from the UCS FI? Appreciate your response.Thanks

Using Appliance Ports for NASHey all connecting a NAS to UCS. Would like to plug in directly to FI’s using the Appliance Port option. Are the steps basicallyTurn on Ports use as Appliance PortsMake PIN Group through Appliance Ports (this will only be...

Hi,I would like to know if i can directly attach a standalone server with 10G CNA to the UCS 6100 10G port and it login to the switch. For example the way we do with c5020 switch. In the 6100 CLI config guide i have not seen any command like binding ...

Hello,Does the P81E Card support Twinax cable?Regards,

Dear colleagues!     My customer planned migration UC to VMware platform. When I sent him Specs-Based Hardware Requirements for running Cisco UC on Supported Versions of VMware vSphere ESXi (http://docwiki.cisco.com/wiki/Specification-Based_Hardware_...

Hi,I would like to connect two nexus switches with a link. Like one c5020 and one c5548p. How do i need to configure the ports at both the switches which will be joined with a fiber cable. For MDS switches such links becomes E-port and fabric is merg...

Setting up new UCS with 2.0(1s). The bundle shipped with the hard disks in each b200-m2. Prior to installing ESX5, the hard disks were removed (blade powered down) and blanking panels inserted. The service profile has a "no local storage policy" and ...

I have two fabric interconnect 6120xp in cluster on one i find the ip in running config and on the partner i dont. It might be due to this i dont get the ipaddress of the fabric interconnect (shows as 0.0.0.0) on my san switch when querying fcns data...

Hi,I am kind new to the UCS configuration arena. I got a complete setup with a Blade Chassis and two N10-6100 fabric interconnect to it. The setup was used earlier. When i brought it to our lab i need to change the ipaddress that it previously has. I...

Hello, I looked around for awnsers for the following issue but couldn't find anything regarding this particular configuration.We got an EMC storage directly attached to a Fiber interconnect 6100 running 2.0 with Storage FC port configuration. Current...

Hi, Cisco Geeks:I need your expert expertise on the following:1. Understand that Cisco UCS firmware version 2.0(##) supports disjoint Layer 2 network, etc.Q1.So do I have to change the FI to Switch Mode FIRST?Q2.For LAN & SAN setup and maybe all othe...

Hi,I have 2 x C210M2 Servers with 6 NICs on each Server.I am looking for some guidance on NIC teaming when using the following VMsUCUnity ConnectionUCCXI was intending two use 2 teamed NICs for ESXI and the remaining 4 teamed NICs for the 3 UC applic...