12-19-2011 03:47 AM - edited 03-01-2019 10:11 AM
Hi,
I have a 5548 that I need to connect to a firewall that supports 100 Mbps only.
Can I configure interface speed on Nexus 5548 interface (GLC-T) to 100 Mbps inorder to connect it to the firewall??
Regards,
Sabih
Solved! Go to Solution.
12-20-2011 05:25 PM
Hi Sabih,
The interfaces on a Nexus 5548 can NOT be configured as 100 Mbps.
If you wish to connect to the firewall via a 100 Mbps connection, you will need to make use of a Fabric Extender (Nexus 2000) that supports 100 Mbps.
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-618603.html
Thanks,
Michael
12-20-2011 05:25 PM
Hi Sabih,
The interfaces on a Nexus 5548 can NOT be configured as 100 Mbps.
If you wish to connect to the firewall via a 100 Mbps connection, you will need to make use of a Fabric Extender (Nexus 2000) that supports 100 Mbps.
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-618603.html
Thanks,
Michael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide