Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

B200 M3 Memory Upgrade

Hi All,

I have a customer who is look to double the memory allocation in their B200 M3 Server blades.

At present they have deployed 8 x UCS-MR-1X162RY-A (16GB DDR3-1600-MHz RDIMM/PC3-12800/dual rank/1.35v) so wanted to verify if there are any concerns or gotcha's that need to be taken into account when moving from 8x to 16x.

Many Thanks, Paul

Everyone's tags (2)
Cisco Employee

Re: B200 M3 Memory Upgrade

Hi Paul

The most important thing to do is to follow the DIMM population rule. This rules can be found on the spec sheet below for this server.

DIMM population rules (page 39)

Let me know if this helps

Cisco Employee

Re: B200 M3 Memory Upgrade

Hi Paul

Did you find the information you were looking for?

Be kind and Mark as Answer if I helped.