Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

B200 SR-IOV

Hi,

My UCS chassis is full of B200 M3's on 2.0(3a).  Do I require a firmware upgrade first before I investigate configuring the UCS for SR-IOV?

Thanks.

3 REPLIES
Cisco Employee

B200 SR-IOV

Hello Stan,

SRIOV feature was introduced in UCSM 2.1.1a version.

VM FEX for KVM SRIOV

VM FEX for Hyper-V SRIOV

Release notes

http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/UCS_28313.html

Padma

New Member

B200 SR-IOV

Just another question.  Currently, we present 4 NICS to the Hyper-V host, with the VLAN ID configured on the UCS for each NIC.  In a VM-FEX scenario, where is the VLAN ID configured?  Does that still reside on the UCS, or is the VLAN for each required NIC configured in the Hyper-V networking on the host?

Regards

Cisco Employee

B200 SR-IOV

Hello Stan,

Please refer to following article for VMFEX ( SR-IOV ) with Hyper-V

VM-FEX with Hyper-V Configuration Example

http://www.cisco.com/en/US/products/ps10281/products_configuration_example09186a0080c1780d.shtml

Padma

322
Views
0
Helpful
3
Replies
CreatePlease to create content