Hello, I try to deploy ESX5.5, ESX 6.0 or ESX 6.5 on UCS-E140S-M2 in ISR4451. I succeed to deploy the iso file by the KVM. AFter ther first reboot, I need to configure the ESXi IP adress to deploy the OVA and manage it. During this first reboot, the...
Hi I am super frustrated with our FlexPod and Cisco at the moment so I am reaching out, hopefully some expert can spot the issue. I have had a TAC open with them for almost 2 months now and it seems no one knows much about this stuff, but they tell ...
With Haseeb Niazi and Chris O'Brien Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Single-Site and Multisite FlexPod Infrastructure with experts Haseeb Niazi and Chris O'Br...
we have a problem connecting a new UCS system to Nexus 5K Switches.Our main Problem ist that no traffic from UCS System is show on Nexus Switch. I made a bare metal installation of VMWARE 6.5. on one blade and try to ping the VMNIC 0 IP from outside ...
We have a couple UCS B200 M2 blades that we would like to add to another 5108 Chassis. The Chassis is currently running 3.1 (2b), the existing blades (B200 M3/M4) are running 3.1(22a) and the Fabric Interconnects (UCS 6296UP) are running 5.0(3)N2(3...
i am getting error upgrading server firmware 2.2(5) to 3.2(1) sys/chassis-1/blade-5(FSM:sam:dme:ComputePhysicalAssociate). Remote-Invocation-Error: BIOS Update Failed: Unable to flash new BIOS Image any idea?
Does anyone know if the Qlogic QLE-2694 Fiber channel adapter is supported in the UCS240 M3 SFF?
Hello, Does Fabric Interconnect 6100 series support Dis-joint layer 2 configuration. As far as my understanding it has nothing to do with hardware, it is related to code that is running on the FIs. I have 2.x code running on FIs (6120s). Please let...
Hello, I ran the 3.0(3a) host upgrade utility on a C220 choosing to upgrade all components. During the process the server powered down, and now I can't authenticate to the CIMC to get back in to power up. I've tried the current admin credentials I ...
can someone help on this? need to get the model # and serial on my blade servers
Hello, Is it possible to have the UCS FI uplinked as below for FCoE connectivity-- UCS FI --> Nexus5k (NPV mode) --> Nexus5k FCF Thank you!
Hi,I encountered the following Ansible Modules for UCS Manager article:Ansible Modules for UCS Managerand wanted to find out if there is an Ansible module (or modules) available (or in the works) that will help with provisioning Service Profile polic...
I am unable to find and download recommended enic driver for my UCSB-420-M4 server. As per HW SW compatibility matrix recommended driver version for Redhat OS is 2.3.0.31, but enic driver version in the ISO is outdated. I cannot even find the require...
I have integrated UCS-Central into UCS-manager and created some test UUID Pools, MAC pools on UCS Central but my problem is that they are not showing up in UCS-manager, does anyone know what i am doing wrong?
Hello, is there a best practice guide for a bare metal setup with B-series M-4 B-200 with Server 2016 as the OS?
