Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Blade failure recovery

Hi,

I have associate a SP to a blade.

If the physcial blade failed, could I configurate the SP in order that automatically the SP should be  associated with another free blade ?

If YES, how I have to configurate the SP or SP template ?

Thx for your feedback

Best regards

Nicolas.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Blade failure recovery

Hi Nicolas,

I would give you a big answer to complicate the escenario, but Robert Burns answered this same question (unles I misunderstood you) a few days back, see this:

https://supportforums.cisco.com/message/4032942#4032942

The logic he explains is the reason why this is not done in UCSM.

I hope this helps with your question.

-Kenny

3 REPLIES

Re: Blade failure recovery

Hi Nicolas,

I would give you a big answer to complicate the escenario, but Robert Burns answered this same question (unles I misunderstood you) a few days back, see this:

https://supportforums.cisco.com/message/4032942#4032942

The logic he explains is the reason why this is not done in UCSM.

I hope this helps with your question.

-Kenny

New Member

Re: Blade failure recovery

Thx Keny for the url.

-Nicolas

Re: Blade failure recovery

Sure Nicolas, my pleasure.

-Kenny

216
Views
0
Helpful
3
Replies
CreatePlease login to create content