Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Blade server asking for reboot or insertion of media.

We suffered power loss and are now having trouble bringing our servers back online. What is the best path to take when the server is asking me to reboot or insert media? Thanks for any help!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Blade server asking for reboot or insertion of media.

Hello,

It seems that you are doing boot from SAN and your UCS come up before storage or SAN. Just reboot the servers again after you be sure your storage and san are working well.


If all that I said no make sense to you, please check your boot policy configuration.

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_011101.html#task_1F7624A2A07B48459AB57B9593D98E84

Richard

2 REPLIES
Cisco Employee

Re: Blade server asking for reboot or insertion of media.

Hello,

It seems that you are doing boot from SAN and your UCS come up before storage or SAN. Just reboot the servers again after you be sure your storage and san are working well.


If all that I said no make sense to you, please check your boot policy configuration.

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_011101.html#task_1F7624A2A07B48459AB57B9593D98E84

Richard

New Member

Blade server asking for reboot or insertion of media.

Thank you! Systems are online.

166
Views
5
Helpful
2
Replies