The port-channel concept is not used in the 6100 to I/O mod connection. The High availability architecture of the connections from mezz cards to the network are pinned to provide best configuration and load balance for link failures
I did mention an "uplink" port. A FI-IO link is a downstream link or server/host port.
Many thanks for the link. very interesting esx design btw (altough it uses the palo nic which will not be available at fcs, the same for the full-width servers). this is a pitty because i am forced into an esx design with 2 nics only....
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...