Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

C250M2 memory upgrade with 8GB and 4 GB

Hi

we have C250 m2 dual CPU servers with 128GB =32 X 4GB memory modules and now we have purchased 8GB memory modules to add to same servers.

When I install newly purchased 6 x 8GB modules with existing 4GB modules it gives an memory error.

Need to know whether mixing of 8GB & 4GB is not supported configuration or any workaround to resolve this mater.

 

1 REPLY

Hi,Mixing DIMMS is possible

Hi,

Mixing DIMMS is possible with the UCS C250 M1, please see the guide here;

http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C250M1/install/replace.html#wp1073477

Note The 4-, 8-, or 12-DIMM configurations are not supported in UCS C250 Generation M2 servers. 

The 4-, 8-, or 12-DIMM configurations are supported in UCS C250 Generation M1 only.

Regards,

Richard

17
Views
0
Helpful
1
Replies