I am setting up a Cisco UCS C220 M3S, and we have configured the CIMC, and agreed to the CIMC, after several reboots of the system, the card CIMC has ceased to function does not have link and each time you connect the cable to the physical card, the server is not started.
Do you have some idea of what could happen ?
It seems to be a physical problem with the server, we run the diagnostics with SCU and detects no physical error.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...