Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco UCS 6248 + Cisco Nexus 5548 + EMC VNX 5500 Configuration Help

Hi,

I need help to configure my Cisco UCS 6248 + Cisco Nexus 5548 + EMC VNX 5500, I have a following connectivity in place

FI-6248-A to N5K-A - 4xFCoE

FI-6248-A to N5K-B - 4xFCoE

FI-6248-B to N5K-A - 4xFCoE

FI-6248-B to N5K-B - 4xFCoE

VNX SPA-P1 - N5K-A-1/31 on 8G

VNX SPA-P2 - N5K-2-1/32 on 8G

VNX SPB-P1 - N5K-B-1/31 on 8G

VNX SPB-P2 - N5K-A-1/32 on 8G

What configuration I need to do at 6248 & 5548 Level so I can able to populate LUNs from VNX to my ESXi hosts

-Amit

2 REPLIES
Cisco Employee

Cisco UCS 6248 + Cisco Nexus 5548 + EMC VNX 5500 Configuration H

Hello Amit,

Is it FCoE end to end or FC between N5K and VNX ?

UCSM 2.1 is required for FCoE uplink from FI.

Sample configuration is available here

https://supportforums.cisco.com/thread/2205748?tstart=30

If it is FCoE towards VNX, configuration would be similar as above. If not, you can refer to following guide for FC interface configuartion.

http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html

HTH

Padma

New Member

Cisco UCS 6248 + Cisco Nexus 5548 + EMC VNX 5500 Configuration H

Following is the answers for the question you asked

Is it FCoE end to end or FC between N5K and VNX ? - FC between N5K and VNX

I am running 2.1(1a) and I have gone thru sample configuration which you have provided

For FC we have made port 29-32 type FC on 5548

I have post one more configuration help question in same fourm

4622
Views
0
Helpful
2
Replies
CreatePlease login to create content