04-05-2013 08:20 AM - edited 03-01-2019 10:58 AM
Hi,
I need help to configure my Cisco UCS 6248 + Cisco Nexus 5548 + EMC VNX 5500, I have a following connectivity in place
FI-6248-A to N5K-A - 4xFCoE
FI-6248-A to N5K-B - 4xFCoE
FI-6248-B to N5K-A - 4xFCoE
FI-6248-B to N5K-B - 4xFCoE
VNX SPA-P1 - N5K-A-1/31 on 8G
VNX SPA-P2 - N5K-2-1/32 on 8G
VNX SPB-P1 - N5K-B-1/31 on 8G
VNX SPB-P2 - N5K-A-1/32 on 8G
What configuration I need to do at 6248 & 5548 Level so I can able to populate LUNs from VNX to my ESXi hosts
-Amit
04-05-2013 10:19 AM
Hello Amit,
Is it FCoE end to end or FC between N5K and VNX ?
UCSM 2.1 is required for FCoE uplink from FI.
Sample configuration is available here
https://supportforums.cisco.com/thread/2205748?tstart=30
If it is FCoE towards VNX, configuration would be similar as above. If not, you can refer to following guide for FC interface configuartion.
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
HTH
Padma
04-08-2013 05:14 AM
Following is the answers for the question you asked
Is it FCoE end to end or FC between N5K and VNX ? - FC between N5K and VNX
I am running 2.1(1a) and I have gone thru sample configuration which you have provided
For FC we have made port 29-32 type FC on 5548
I have post one more configuration help question in same fourm
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: