I was hoping someone can point me in the right direction, been to support and they didn't know or didn't get what I was asking.
I currently have two sets of Fabric interconnects 1 in one data centre and also another in a different datacentre.
I have been given just one PAK code which has 120 licence on it, I have looked and started using the UCS licence PDF but this doesn't explain my situation. The PDF I have attached to this post.
How do I split the ports of the PAK code into different FI and which FI serial number do I pick as the license web page says I need to run a command on the FI directly and the PDF explains I just need the serial out of the Java GUI.
So can anyone tell me how to split the PAK code, so I can license the two sets of FI’s?
Along with the Host-IDs of all FI's, you can then redeem X licenses against a particular Host-ID #. Then the license file you'd install on the FI's would be emailed to you. Akk license files are tied to the Host-ID/Serial #.
UCS-A# scope licenseUCS-A /license # show server-host-id
Server host id:
Scope Host Id
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...