UCSM cannot provide information about CPU and memory utilization of a blade. However, I am not sure whether SNMP MIBs supported by UCSM can provide utilization counters. OS running on these blades can provide such information.
Regarding network bandwidth, you can monitor the utilization of end points at different places
The VIC ( NIc ) stats are available under service profile.
Server and Uplink port stats are under Equipment > FI
Mezz ports on the backplane are found under Equipment > Chassis > IOM > Backplane
For continuous monitoring, you would need use other monitoring solutions like MRTG, Solarwinds etc.
If you have configured threshold policies, UCSM can generate alerts if the utilization exceeds configured threshold value.
I know this is a stale thread but wanted to confirm if the MIBs now support the ability to gather utilization data natively from the B series blades or C series rack mount servers? Or is it still they case that we need to derive this data from the hypervisor?
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...