Cisco Support Community
Community Member

Cisco UCS Emulator

Good days Gurus,

I am being tested in the emulator of UCS, the characteristics of Local Zoning of the fabric. The versions are not saved! that I am using are :

Cisco_UCS_Platform_Emulator_2.1.1ape2 and Cisco_UCS_Platform_Emulator_2.1.3aPE1.

The steps that I am doing are:

1.- Configure the FC fabric in Switching Mode.

2.- Create VSAN in Storage Cloud.

3.- Choose the ports on the two Fabric FC Storage Ports.

4.- Change those ports to FC Storage Ports and change the VSAN created in point 2.

5.- We created the profile and in the choice of Storage we create the vHBAs, vsans created in point 2.

6.- Create the policy of Storage Connection Policy.

7.- We created the vHBA initiators.

In principle these are the steps, the profile is created correctly, but when it comes to associate in WSF gives an error of verifying the Local Zoning and is not associated to the server.

Don't know if it is problem of the emulator that does not support Local Zoning or i'm doing some step wrong.

Many thanks in advance.

CreatePlease to create content