Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco UCS - Syslog /Trap vs Event Subcription

Cisco UCS allows for clients to subscribe for XML based events that can be used to receive configuration change information over http/https. Is the same/similar information available via Syslog messages or SNMP traps from UCS? If not, what information is available via the Syslog messages or Trap notifications ? Also is the Syslog or Snmp trap functionality supported in the Cisco UCSM simulators ?

1 REPLY
Silver

Re: Cisco UCS - Syslog /Trap vs Event Subcription

You can set SNMP traps to monitor fans, power supplies, and temperature settings, or to test a call home application. Use the following commands to set SNMP traps:

test pfmtest-SNMP-trap fan

test pfmtest-SNMP-trap power supply

test pfmtest-SNMP-trap temp-sensor

SNMP Traps and Informs:

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/mib/reference/UCS_MIBRef.html#wp75887

Set up Syslog for Cisco UCS:

http://www.cisco.com/en/US/products/ps10281/products_configuration_example09186a0080ae0f24.shtml

2507
Views
0
Helpful
1
Replies