In our lab i am testing with VMware 5 and Cisco UCS. We are running UCSM 2.0 (1m). I am now testing the part auto deploy. I have setup auto deploy in VMware and it is working ( first i had some issues with DHCP on windows that is solved in the UCSM 2.0 (q) version ). vSphere gets deployed to the blade. When the blade ( vShpere ) wants to connect to vCenter i get an error from vCenter that it has not enough licesing for this action. I have loaded plenty of VMware lics. When i create a VM it boots perfectly and apears in vCenter.
I have search the internet for people who have the simailer problem but couldn't find it.
Has some body the same problem our could help me out?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...