Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco UCS

Looking for a Design Guide where I can see how exactly design and configure Cisco UCS Blade Series Servers with (2) 2200 IOMs to Fabric Interconnects.  I like to see how Fabric Interconnects connect to Cisco FEXs.

The design guides I have downloaded from Cisco only talks about Cisco FEXs at a very high level, not going into too much details how they connect to  Fabric Interconnects.

As I understand correctly, Fabric Interconnects itself have may server ports that connect down to Chassis IOMs.  Trying to understand how Server Ports on Fabric Interconnects can work inconjuction with Cisco FEXs.

 

 

 

2 REPLIES
Cisco Employee

Hi Abbasali, Cisco FEXes in

Hi Abbasali,

 

Cisco FEXes in UCS are use for C-Series server integrations. You won't be able use the FEXes to expand the number of ports on your fabric interconnect.

C-Series integration documentation below

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-1/b_UCSM2-1_C-Integration/b_UCSM2-1_C-Integration_chapter_01.html

 

Don't forget to rate any useful posts.

Community Member

fex can directly connect to

fex can directly connect to fabric interconnect

 

http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-5100-series-blade-server-chassis/ucs_kaon_model_preso.html

112
Views
0
Helpful
2
Replies
CreatePlease to create content