The original configuration request was for 16GB of memory in a C250 M2. In using the Netformx UCS version (beta), it seems to be telling me that I need 4 pairs of 8GB DIMM's for each processor and with two processors, it would appear that 64GB total memory is the minimum memory size. Using anything less than 4/processor results in a validation error. Netformx indicates the smallest DIMM pair available is 8GB (2x4GB).
Is this the case? It appears that the M1 was happy with less!
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...