correspondence nxos version and ucsm version

[Stephane TAILPIED]

To check compatibility between our Cisco MDS 9000 and UCS Manager, is there a correspondence table betwenn the UCSM versions and the NXOS versions inside ?

Example : the last UCSM 2.2(1b) contains nxos 5.2(3).

It seems this nxos version is not compatible with different version of MDS9000 (in fact it is not in the matrix of Cisco MDS9000 !!!).

I would check on some earlier versions of UCSM.

Thanks

Stéphane

[Walter Dey]

did you check http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2-21.pdf

under Switch Interoperability Matrix Table 10

[Stephane TAILPIED]

Thank you for doc.

Futhermore, is Cisco documents the version of nxos for all UCS Infra software release ?

[Walter Dey]

In the infrastructure bundle "ucs-k9-bundle-infra.2.2.1c.A", you see the nx-os version. Or in a UCS installation