Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Corrupted Init Sequence on the Bios

On the UCSM Under - equipment -> Chassis -> Chassis n -> Server -> Server n -> installed firmware tab -> right click on BIOS -> copy xml

If you inspect the xml the following property is corrupted. What could cause this corruption.?

Since this is corrupted, the resulting xml is bad (malformed) and I cannot talk to the UCS via api.

a good init sequence

initSeq="0x89:0x60:0xbe:0x00:0x00:0xcc:0xbe:0x04:0x00:0x68:0x00:0xae:0x3b:0x00:0x00:0x01:0x80:0x80:0xbe:0x01"

Everyone's tags (2)
1 REPLY
Cisco Employee

Corrupted Init Sequence on the Bios

Hello,

They are BIOS POST codes.

Can you please provide following information

Blade model

XML value from non-working blade

Is this new blade or has this worked before ?

Is it associated with a service profile ?

UCSM  version ?

There is a known issue which is fixed in 2.0.2m version and above.

De-commissioning and re-acknowledge the blade will do the trick.

Padma

351
Views
0
Helpful
1
Replies