In the UCS Cetral we've applied the Dynamic vNIC connection policy to the whole Service Profile. After that 54 dynamic vNICs were created, respectively. But they were created without any MAC addresses. It causes the error while associating SP to the blade server. Does that mean I have manually choose the MAC pool in the properties of any created dynamic vNIC or there is some other way to assign MAC on the stage of vNIC creation? Thanks in advance!
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...