We have recently setup a Cisco UCS platform, with 4 chassis, and using the fabric interconnect/UCS Manager to manage the racks.
Our monitoring team uses EMC Smarts (v9) for monitoring the whole environment. We have been having trouble getting the UCS platform setup into EMC Smarts, so just wondering if anyone out there uses a similar configuration and how they do it.
One of the issues we have found was that, the UCS Manager wasn't discoverable by SMARTS and only the interconnects were.
Also we have been told that UCSM Mibs contain SNMP traps for a few specific events, and the rest of the MIBs are for polling, however SMARTS doesn't provide custom polling by default for UCS. Has anyone come across this? I am quite interested i finding out how everyone monitors their platforms especially if they using EMC Smarts.
I am no monitoring expert, but can find out specific details if need be from our monitoring team.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...