ESXi not communicating with the outside network through Fabric Interconnect
I'm having an issue with an ESXi server, installed on a blade in a Cisco B-series chassis communicating with the upstream network through the Fabric Interconnect. I have the VLANs configured that it should be communicating across and I'm able to get to the KVM manager interface for the servers but I cannot get the ESXi servers to pull an IP, or to communicate to the network with it statically set.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...