09-21-2017 01:49 PM - edited 03-01-2019 01:18 PM
Possible loss of CMOS settings: CMOS battery voltage on server 8/1 is lower-critical Severity Level:5
Health LED of server 8/1 shows error. Reason: P3V_BAT_SCALED:Voltage Threshold Crossed; Severity Level:4
Both errors occured suddently & we are out of support from Cisco for this blade's serial number.
This is UCSB-B420-M3, please suggest the troubleshooting or solution.
Solved! Go to Solution.
09-21-2017 01:58 PM
You can just replace the CMOS battery with a lithium button cell battery from any store that sells small batteries. If you open the server, you will see the small quarter sized CMOS battery.
Cisco no longer replaces these items any longer even with a support contract per:
Lithium Batteries Discontinued as Service Replacement Parts Product Bulletin
09-21-2017 01:58 PM
You can just replace the CMOS battery with a lithium button cell battery from any store that sells small batteries. If you open the server, you will see the small quarter sized CMOS battery.
Cisco no longer replaces these items any longer even with a support contract per:
Lithium Batteries Discontinued as Service Replacement Parts Product Bulletin
09-21-2017 02:15 PM
Thanks Wes for the quick response. I hope to implement that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide