Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

F0531 error - RAID battery inoperable

I see these 2 errors in few of our blades after upgrading them to 2.1(3a).

F1237 - Health LED of server 1/1 shows error. Reason:RAID_BATT_FLT:Sensor Failure Asserted;

F0531 - RAID Battery on server 1/1 operability:inoperable. Reason:

Any inputs on these errors?

Thanks

Subbu

3 REPLIES
New Member

F0531 error - RAID battery inoperable

Hi Sye,

What type of server is this?

This may be related to a bug depending on the server, etc.Typically, if the logs are not showing an actual hardware fault, in that scenario, decomissioning the blade and re-acknowledging it and or trying to reset the CMOS, might resolve it.

Thanks.

-Bruce

Cisco Employee

F0531 error - RAID battery inoperable

Hi Sye,

This error is most commonly seen when the battery needs to be replaced in a UCS B440.

Fault Code:F0531

Message

This fault occurs when the RAID battery voltage is below the normal operating range.

Recommended Action



Step 1 Replace the RAID battery.

Step 2 If the above action did not resolve the issue, create a show tech-support file and contact Cisco TAC.


Here is the battery location:

Captura.JPG

Chris,

New Member

F0531 error - RAID battery inoperable

Hi Chris,

Is there a way to confirm if the battery needs a replacement? Or is it always assumed that it needs to be replaced for the fault code:F0531?

Subbu

939
Views
0
Helpful
3
Replies
CreatePlease to create content