FlexFlash Mirror with firmware 2.2 Can I mirror SD card 1 to SD Card 2 nondestructively?
I have B200 M3 series Blades with ESXI 5.1 loaded on UCS-SD-16G 16GB SD Card module, I have since upgraded chassis and blade firmware to latest version 2.2 and installed a second UCS-SD-16G 16GB SD Card module in each blade
My question is Can I mirror SD card 1 to SD Card 2 nondestructively thereby preserving my esxi installation which is in production on SD Card 1? Or do I have to create scrub policy and then create raid 1 mirror and reload hypervisors
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...