Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Global Service Profile Association Issue with UCS Central

Hello everyone,

I have a problem with Global Service Profil association from UCS Central.

After creating all my Global Pool/Policie/SP-Template i create a SP from my Template (from here no prob)

When I associate my SP with a Blade I have a fail in the step sequence that you can see in the "Step_Sequence" file atteched

It create eeror message that you can see in the attached files "Error1, Error2, Error3"

To check if it come from my configuration i created an "empty" SP from UCS Central with no vNIC/vHBA/Policy, and i have the same problem when i deploy it in my bale (i tried with different blade in different UCS Domain).

To be sure that come from UCS Central, I created a local SP with the global policies i created on UCS Central, and it work. what i saw is that the step what fail before is skiped when i create my SP from local domain.

 

My questions are:

- Do you know what is the step that fail in the Step Sequence?

- Do you have an idea of what is this error ?

Thanks for the Help

Best Regards

 

 

 

 

Everyone's tags (1)
5 REPLIES
VIP Green

HiAs you can see, the error

Hi

As you can see, the error is "copy files to peer node......"

Have you a firewall between UCS Central and UCS domain.

Required TCP Ports

The following TCP ports must be open between Cisco UCS Manager and a registered Cisco UCS domain for the firmware management and backup functionality to work correctly:

  • LOCKD_TCPPORT=32803
  • MOUNTD_PORT=892
  • RQUOTAD_PORT=875
  • STATD_PORT=32805
  • NFS_PORT="nfs"(2049)
  • RPC_PORT="sunrpc"(111)
New Member

Thanks for the reply, I have

Thanks for the reply,

 

I have no firewall between my UCSM and my UCS Central

 

Something i forgot to specify : UCS Firmware 2.2(3b), UCS Central 1.2(1a)

New Member

I think i found the solution.

I think i found the solution.

 

The problem seems to come from the firmware policy

 

when i try to deploy a service profile with the firmware policy attached it bug. when i try with the same SP without the firmware policy it works !

VIP Green

Very good !Q. did you create

Very good !

Q. did you create a global host firmware package under

Domain Groups > Domain Groups Root > Firmware Management

This should work !

New Member

Its seems that the problem

Its seems that the problem come when you try to deploy a Service Profile with a Firmware in the Firmware Policy. The solution i found is to create a Firmware Policy with no Firmware selected and it works.

354
Views
0
Helpful
5
Replies
CreatePlease login to create content