Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How can i configure fence_cisco_ucs with redhat cluster suite

HI

How can i configure fence_cisco_ucs with redhat cluster suite.

i was trying to configure fencing aganet with red ahat cluster suite

i issued command

#  /usr/sbin/fence_vmware_soap -a 172.22.90.61 -l admin -p duc2Cisco -o reboot

then i got below error:

Failed: You have to enter plug number

Please use '-h' for usage

what is this plug number and from where can i get this plug number.?

I am new to this Cisco UCS, becuase this hardware is provided my some other team and i am the one installing Red Hat cluster suite. I requested fencing agent configuration with Cisco, and that guy dosen't know what is fencing..

please help me, because of this issue, production got delayed

regards,

Ben

Everyone's tags (2)
6 REPLIES
Cisco Employee

How can i configure fence_cisco_ucs with redhat cluster suite

Hi Ben,

Are you using fence_cisco_ucs or fence_vmware_soap?  For fence_cisco_ucs I believe the plug number is the name of the service profile attached to the server.

New Member

Re: How can i configure fence_cisco_ucs with redhat cluster suit

HI

thanks for your replay

actually i tried both fence_cisco_ucs and fence_vmware_soap. which one is used for fencing configuration..

i think both method asking for plug number.

i have access to UCS control panel. from where can i get these service or plug number.

i tried te below, i don't i took one profile name from UCS cpanel and checked:

/usr/sbin/fence_cisco_ucs -a 172.22.90.61 -l admin -p duc2Cisco -n org-root/ls-cgceccprd1 -o reboot

Traceback (most recent call last):

  File "/usr/sbin/fence_cisco_ucs", line 147, in

    main()

  File "/usr/sbin/fence_cisco_ucs", line 120, in main

    res = send_command(options, "")

  File "/usr/sbin/fence_cisco_ucs", line 92, in send_command

    c.perform()

pycurl.error: (28, 'connect() timed out!')

that also got error

Thanks & regards,

Ben

New Member

Re: How can i configure fence_cisco_ucs with redhat cluster suit

please anyone tell me how can i configure fencing with fence_cisco_ucs.

from where can i get the Ip and all details.. i sthat same IP of KVM we need to give or any other IP

can i know this KVM IP is only for communicating between ucs central and server.?

regards,

Ben

Cisco Employee

Re: How can i configure fence_cisco_ucs with redhat cluster suit

Hi Ben,

Which IPs have you tried?  I think it is the ucs manager ip that you need to use.  Are the ports open between the rhel blade and ucsm?  80/443 tcp depending on your setup.

New Member

Re: How can i configure fence_cisco_ucs with redhat cluster suit

Hi

ports are opened between servers

ucs manager IP with wat all are the details i need to provide

Regards,

Ben

Cisco Employee

Re: How can i configure fence_cisco_ucs with redhat cluster suit

Hi Ben,

Could try adding ssl and removing the org name like this, sounds like a connectivity issue

fence_cisco_ucs -a 172.22.90.61 -l admin -p duc2Cisco -z -n cgceccprd1 -o reboot

1735
Views
0
Helpful
6
Replies