hi how many uplink port profiles is necessary for the nexus 1kv?
I have 1 uplink port profile and looks like this
port-profile type ethernet UCSTEST-n1kv-uplink vmware port-group switchport mode trunk switchport trunk allowed vlan 1,10,15,17,20-60,160,162,220 switchport trunk native vlan 50 mtu 9000 channel-group auto mode on mac-pinning no shutdown system vlan 50,60,220 state enabled
When is it necessary to create 2 or more uplink port profiles?
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...