Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to clear Faults on UCSM 1.4(3q)

Hello,

I'm running a 1.4(3q) platform and i'd would like to clear all the faults displayed on the UCSM.

How can i do that ?

i would like to delete faults because in some case, it very old faults.

All the faults are Acknoledged but i can't clear it.

Thanks

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

how to clear Faults on UCSM 1.4(3q)

Can you capture a screen shot of the fault or the faults details from the CLI and attach it there.

as well as a capture of the backup jobs.

One quick thing you can try, if its for a back job which is still present in the UCSM: try to delete the job and this should clear the fault. You can then re-create the job once the fault is cleared.

./Abhinav

5 REPLIES
Silver

how to clear Faults on UCSM 1.4(3q)

Hi florent,

In UCSM the faults are not cleared untill the condition causing those faults are not cleared. I would advise you to look at the reason for the faults and resolve those which will clear the faults.

Thanks!

./abhinav

New Member

how to clear Faults on UCSM 1.4(3q)

Ok, thanks for responding.

i'm ok with your answer but some faults are not cleared.

As a example, there is a critical fault concerning a backup that is not perform.

Fault Code:F999723

But now the backup is working correctly.

thanks

Florent

Silver

how to clear Faults on UCSM 1.4(3q)

Can you capture a screen shot of the fault or the faults details from the CLI and attach it there.

as well as a capture of the backup jobs.

One quick thing you can try, if its for a back job which is still present in the UCSM: try to delete the job and this should clear the fault. You can then re-create the job once the fault is cleared.

./Abhinav

New Member

how to clear Faults on UCSM 1.4(3q)

Thanks Abhinav,

The fault has been cleared, when i deleted the backup jobs.

So i thinks i must parse all the faults.

Thanks a lot.

Florent

Silver

how to clear Faults on UCSM 1.4(3q)

Good to know it worked for you

./abhinav

1317
Views
5
Helpful
5
Replies