Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to connect c240 to FI in direct mode

Hi

I have upgrade fi to 2.2(1b) and the cna adapter to the newest version,

The 1225 adapter is in pci 2 slot.

then i connect 240 rack server to fi ,and the fi port is server port.

but i can not discovry 240 , and i don't konw why

any idea ? thanks

  • Unified Computing
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

how to connect c240 to FI in direct mode

Cheng,

The most common issue with Discovery is when a rack server server was used for something prior to integration or has some setup on the CIMC.  Try connnecting a Keyboard and Mouse to the system and Press F8 to enter the CIMC configuration.  Then set the CIMC to factory defaults.  After you do this connect to the FI again and try discovery.

Steve McQuerry

UCS - Technical Marketing

2 REPLIES
Bronze

how to connect c240 to FI in direct mode

Cheng,

The most common issue with Discovery is when a rack server server was used for something prior to integration or has some setup on the CIMC.  Try connnecting a Keyboard and Mouse to the system and Press F8 to enter the CIMC configuration.  Then set the CIMC to factory defaults.  After you do this connect to the FI again and try discovery.

Steve McQuerry

UCS - Technical Marketing

New Member

how to connect c240 to FI in direct mode

Thanks for you support

237
Views
0
Helpful
2
Replies
This widget could not be displayed.