How to enable and connect an external USB drive to a B200 M3 blade?
We connected an external USB drive to the doogle of our UCS B200 Blade. We have OVM Server installed on the blade, but the USB drive is still not visible. Do I have to enable a specific setting on the service profile?
We have checked enable on USB Front Panel Access lock on the BIOS Policy (Advanced tab, USB Section).
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...