Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Installing windows 2008 r2 64 on UCS b-series server

Dear All,

we are trying to install windows 2008 r2 64 on UCS b-series server. during the installation it give us no signed device drivers were found.

we have downloaded the ucs drivers for b-series version 2.1.2a and 2.1.3a and tried to load the drivers from both of them but didn't work and windows still can't find any disk drives to install on it.

the UCS version on the FI is 2.1.2a. and the firmware for the server adapter is 2.1.3a.

also when we open the drivers iso image we can't find the driver for the VIC 1240.

your help is highly appreciated.

best regards

osama khraisheh

  • Unified Computing
3 REPLIES
New Member

Installing windows 2008 r2 64 on UCS b-series server

Hi,

I have solved the issue by find the correct driver to find the disk drive. this is the location for the disk driver :

\\Windows\Storage\LSI\2004\W2K8R2\x64. after you install this driver you can partition and format your disk.

then it will give you an error msg that "windows is unable to install to the selected location error 0x80300001".

from this point you can just remap the windows iso image again then this msg will disappear and you can proceed with the installation.

best regards,

New Member

Installing windows 2008 r2 64 on UCS b-series server

Hi,

now I am facing the issue on B440 M2 blade server. the drive contoller is LSI megasas 9260.

best regards,

Installing windows 2008 r2 64 on UCS b-series server

Osama,

Look up the drivers in the folder according to the RAID controller used : 

\\Windows\Storage\LSI\2004\W2K8R2\x64  <<< I am almost sure the controller for the first server was a model 2004, so look for 9260 now...

-Kenny

1956
Views
0
Helpful
3
Replies
This widget could not be displayed.