i have server Cisco UCS B200 M2 mounted on it local hard disk A03-D300GA2, when the server start the initailization read hard throgh HBA 0 and when install ESXI on it the Hard Disk appears as Remote Storage.
so anyone can advice why is that and how repair it to appear as local storage not remote.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...