Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LSI 9260-4i cache size query

Hi there,

Running a Cisco UCS C-200, I noticed the cache size reports as 349 MB but I was under the impression that it should be 512 MB

This normal?

http://i.imgur.com/KHLf7Al.png

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

LSI 9260-4i cache size query

Hi,

The number displayed in the CIMC is for the cache lines rather than the overall cache size.  If you SSH into the CIMC and run the following commands look for memory size and it should say 512mb for the 9260-4i.

ucs-c200-m2 /chassis # show storageadapter

PCI Slot Info Valid Product Name                       Serial Number  Firmware Package Build             Product ID     Battery Status Cache Memory Size

-------- ---------- ---------------------------------- -------------- ----------                                                                                ------------------------ -------------- -------------- --------------

SLOT-7   Yes        LSI MegaRAID SAS 9260-4i           S1000     12.12.0-01                                                                                49                       LSI Logic      fully charged  346 MB

ucs-c200-m2 /chassis # scope storageadapter SLOT-7

ucs-c200-m2 /chassis/storageadapter # show hw-config detail

PCI Slot SLOT-7:

    Info Valid: Yes

    Info Invalid Cause:

    SAS Address 0: 5000c50021567829

    SAS Address 1: 5000c5002133f3b5

    SAS Address 2: 5000c50021567389

    SAS Address 3: 5000c50021567431

    SAS Address 4:

    SAS Address 5:

    SAS Address 6:

    SAS Address 7:

    BBU Present: true

    NVRAM Present: true

    Serial Debugger Present: true

    Memory Present: true

    Flash Present: true

    Memory Size: 512 MB                         <-- Actual total memory

    Cache Memory Size: 346 MB              

    Number of Backend Ports: 4

2 REPLIES
Cisco Employee

LSI 9260-4i cache size query

Hi,

The number displayed in the CIMC is for the cache lines rather than the overall cache size.  If you SSH into the CIMC and run the following commands look for memory size and it should say 512mb for the 9260-4i.

ucs-c200-m2 /chassis # show storageadapter

PCI Slot Info Valid Product Name                       Serial Number  Firmware Package Build             Product ID     Battery Status Cache Memory Size

-------- ---------- ---------------------------------- -------------- ----------                                                                                ------------------------ -------------- -------------- --------------

SLOT-7   Yes        LSI MegaRAID SAS 9260-4i           S1000     12.12.0-01                                                                                49                       LSI Logic      fully charged  346 MB

ucs-c200-m2 /chassis # scope storageadapter SLOT-7

ucs-c200-m2 /chassis/storageadapter # show hw-config detail

PCI Slot SLOT-7:

    Info Valid: Yes

    Info Invalid Cause:

    SAS Address 0: 5000c50021567829

    SAS Address 1: 5000c5002133f3b5

    SAS Address 2: 5000c50021567389

    SAS Address 3: 5000c50021567431

    SAS Address 4:

    SAS Address 5:

    SAS Address 6:

    SAS Address 7:

    BBU Present: true

    NVRAM Present: true

    Serial Debugger Present: true

    Memory Present: true

    Flash Present: true

    Memory Size: 512 MB                         <-- Actual total memory

    Cache Memory Size: 346 MB              

    Number of Backend Ports: 4

New Member

LSI 9260-4i cache size query

Hi Brian,

Much appreciated for the answer, have checked and I can see the actual total saying 512 MB

Cheers,

James

328
Views
0
Helpful
2
Replies