Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

m81KR cNA adapter with vsphere 5.5

is the m81KR cna adaptre not compatible with esxi 5.5? I look at the compatibility matrix and did not mention anthing about this card on esxi 5.5

 

for firmware 2.2(1)

 

any idea?

 

 

4 REPLIES
Cisco Employee

Tony, Typically this might

Tony, 

Typically this might also depend on server you're running. 

 

The interoperability tool is pretty accurate and you can always confirm with:

http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2-21.pdf

and 

http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

 

Looks like from CNA only M73KR -E and -Q are supported ( plus VM-FEX and VICs). 

 

M.

Cisco Employee

Hi all,With UCSM at 2.2 based

Hi all,

With UCSM at 2.2 based release, you can still have your server & adapter firmware at 2.1.3 with B200M2 and M81KR running ESXi5.5 and ESXi5.5U1.

This has been already tested and shown in the interop matrix

http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

This is a supported combination

Thanks,

Karthic

New Member

hi I am running b200m2 wih

hi

 

I am running b200m2 wih the m81kr card

 

I am stuck with this hardware but I need to upgrade to esxi 5.5 

 

It looks like its not suppported but just wanted to see if anyone is running this configuration.

 

esxi 5.5 on b200m2 with M81KR

New Member

I'm running vmware 5.5 with

I'm running vmware 5.5 with firmware 2.2(1c) and a M81KR NIC.  Booting is with local storage, so I can't confirm if this will work with features like boot from SAN.

436
Views
0
Helpful
4
Replies