Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

M81KR Mezzanine Card

Hi all,

I've an UCS Blade with an M81KR mezzanine card.

how can I see my WWN on a M81KR and configure IT for "BOOT from SAN"

I've readed that M81KR card doesn't have BIOS

NOTE: My SAN Switch is a Brocade

Thanks

Dario

4 REPLIES
Cisco Employee

Re: M81KR Mezzanine Card

When you config the service profile, you can set the logically wwpn and

wwnn. Within the service profile you can also then config the boot from san

policy.

Eric Rose

Sorry for any typos - by DROIDx

New Member

M81KR Mezzanine Card

I must use a service profile?

Thanks for the answer

Cisco Employee

Re: M81KR Mezzanine Card

Service profiles can be used on a 1:1 relationship, but yes you must use a service profile to configure a sever in UCS Manager.

Eric Rose

Cisco Employee

M81KR Mezzanine Card

Hello Dario,

Cisco VIC ( M81KR ) does not have burnt in WW[P/N]N address. You can configure them by creating HBAs in service profile that will be associated with the blade. Also we need to create a boot policy with SAN boot information and use it in boot order section of the service profile.

More detailed information is availabe here

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_011111.html

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_011101.html

http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_011100.html

Feel free to update the thread if you ran into any issues.

Padma

412
Views
0
Helpful
4
Replies
CreatePlease login to create content