Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Memory for Cisco C200m2 rack server

Hi

I have an C200m2 rack server with 3x2GB of ram memory. I want to extend that to atleast 12Gb of ram how should

Add 1st 8GB module = 3X2GB + 8GB

or remove the old memory and replace it with 3x4GB

//T

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Memory for Cisco C200m2 rack server

Hi Tobias ,

Check this information:

When considering the memory configuration of your server, you should consider the following items:

DIMMs  within the server should all be the same type, speed, and size. Do not  mix different size DIMMs or DIMMs with different clock rates in the same  server. Doing so causes the system to set the memory system speed to  that of the slowest installed DIMMs.

DIMMs can be used either in a one DIMM per Channel (1DPC) configuration or in a two DIMMs per Channel (2DPC) configuration.

There are blue and black DIMM slots. Populate blue slots in a bank first.

Please check the link for further details:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/c200m2_lff_specsheet.pdf

Hope this help!

David

2 REPLIES
Cisco Employee

Memory for Cisco C200m2 rack server

Hi Tobias ,

Check this information:

When considering the memory configuration of your server, you should consider the following items:

DIMMs  within the server should all be the same type, speed, and size. Do not  mix different size DIMMs or DIMMs with different clock rates in the same  server. Doing so causes the system to set the memory system speed to  that of the slowest installed DIMMs.

DIMMs can be used either in a one DIMM per Channel (1DPC) configuration or in a two DIMMs per Channel (2DPC) configuration.

There are blue and black DIMM slots. Populate blue slots in a bank first.

Please check the link for further details:

http://www.cisco.com/en/US/prod/collateral/ps10265/ps10493/c200m2_lff_specsheet.pdf

Hope this help!

David

New Member

Memory for Cisco C200m2 rack server

Thank you David.

//Tobias

432
Views
0
Helpful
2
Replies