It is a bundle that can be seen from the last part of the PID : N6004EF-96Q-BUN
It is difficult to find information for that kind of PID cause they are "bundle" and we do not release spec sheets for those in specific, what is the product you need info for? As mentioned, since this is a bundle, it is very likely that there are more than just one PID on this particular part you mentioned.
I was looking for information as well and found that this part cannot be configured / ordered on it's own, it's only when a base unit of N6004EF-6FEX-10G does the N6004EF-96Q-BUN automatically come up as an automatically added part ...at zero dollar.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...